By sector
Manufacturing and factories
Workplace water, coffee and vending sized for manufacturing and factories. We supply, install and maintain the right equipment with one monthly fee and one team to ring.
The sector
What we see in manufacturing and factories
Manufacturing sites need robust equipment that copes with high-volume use across shifts and physical environments that can be dusty or wet. Most factory installs we do use floorstanding bottle-fed or mains-fed coolers in canteen and break areas, plus tougher units near production lines.
Specific concerns
What matters in a factory
Manufacturing and factories typically raise the following considerations during a site survey:
- Robust hardware that survives industrial environments
- Capacity for shift-pattern use (24/7 in many factories)
- Easy refill for production-line operators
- Lean budgeting with predictable monthly costs
Sector requirements
Getting water right in a factory
Drinking water is a welfare requirement
UK workplace regulations require employers to provide an adequate supply of wholesome drinking water that is readily accessible to staff. On a large site that usually means more than one water point, so people on the shop floor are not walking to the far end of the building for a drink. Our regulations guide covers the detail.
Sized for shift breaks
Factory demand is concentrated into fixed breaks and shift changeovers. Size canteen coolers and water boilers for the number of people on a break at the same time, and add a dispenser in welfare areas closer to production so short breaks are not spent queuing.
Tough units, sensible positions
Dust, heat and forklift traffic shorten the life of an office-grade cooler. We specify robust floor-standing units, position them in welfare areas or protected positions rather than on the production floor itself, and service them on a schedule that suits your shift pattern.
Mains-fed or bottled on a factory site
Mains-fed is the default in canteens and welfare blocks with a water supply nearby. Bottle-fed coolers fill the gaps: mezzanines, large sheds and temporary areas where a pipe run is impractical, with bottle storage and deliveries agreed in advance.
Mains-fed, bottled or hot water
What fits where
| Area | Recommended | Why |
|---|---|---|
| Canteen | Mains-fed cooler plus wall-mount or countertop water boiler | Covers the whole shift breaking at once |
| Welfare area near production | Robust floor-standing mains-fed cooler | Short walk; built for an industrial setting |
| Mezzanine or remote bay | Bottle-fed cooler | No pipe run needed |
| Site offices | Mains-fed cooler or boiling tap | Standard office specification |
What we recommend
Typical setups for manufacturing and factories
The equipment combinations we most often recommend for manufacturing and factories:
- Floorstanding mains-fed coolers in canteens
- Tough bottle-fed coolers near production lines
- Industrial-grade coffee machines for staff areas
- Smart vending stocked for shift workers
See more on the equipment options on our services page.
Settings
Who this is for
This guidance is written for manufacturing and factories settings such as:
- Manufacturing plants
- Food and beverage factories
- Automotive plants
- Engineering workshops
- Pharmaceutical manufacturing
How it works
From site visit to ongoing service
- 01
Conversation about your sites
We start with a quick call about the factory: number of sites, team size, current setup, anything specific.
- 02
Site survey
A free visit to see the space and scope the right equipment. A short visit per site.
- 03
Fixed monthly quote
Written quote covering equipment, install, scheduled servicing, consumables and breakdown cover.
- 04
Install and service
Engineer-led installation across the estate, with scheduled servicing routes built around the way the factory operates.
Frequently asked
Questions from manufacturing and factories
What is the best water cooler for a factory?
A robust floor-standing mains-fed cooler in each canteen and welfare area, sized for the number of people on a break at once, with bottle-fed units where plumbing is impractical. We confirm numbers and positions on a free site survey.
Do employers have to provide drinking water in a factory?
Yes. UK workplace regulations require an adequate supply of wholesome drinking water, readily accessible to staff. Our guide to UK workplace drinking-water regulations explains what that means in practice.
Can you supply water boilers for a factory canteen?
Yes. Wall-mount and countertop water boilers, sized for break-time demand, are a common addition to factory canteens alongside a mains-fed cooler.
How do you service coolers on a 24-hour site?
Servicing visits are scheduled with your site team to avoid peak break times, and every unit has a six-monthly service with sanitisation and filter change.
More sectors
Other industries we work with
Talk to us
Get in touch.
Tell us a little about your site, the team and how the business uses water, coffee and vending, and our team will be in touch to discuss the options.
Book a consultation